| mode |
xk-710 |
| ltem |
|
| working diameter of rollers(mm) |
710 |
| working length of rollers(mm) |
2200 |
| linear speed of front rollers(m/min) |
31.9 |
| speed ratio of front and rear roller |
1:1.15 |
| capacity per.batch (kg) |
150-200 |
| motor power (kw) |
285 |
| overall size l*w*h(mm) |
8246*3556*2270 |
| weight(kg) |
51000 |
| notes |
nylon bush use grease for lubricating,copper bush and bearing use grease or oil |
junlin Rubber Mixing Mill with Stock Blender (XK-710)
1. The mixing mill is made of LTG-H alloy chilled cast iron
2. The open mixing mill speed reducing machine adopts hard tooth, its running noise is low and owns long life. This mixing mill adopts a special design of refining seal structure so that it can eliminate the leakage of lubricating oil.
3. Our Company specially designed the human-orientated machine, such as block rubber board and turbine tapping rubber device of open mixing mill can be used steam style; Open mixing mill operating system design in nearby working areas etc.
4. This mixing mill can be equipped with hydraulic or mechanical device which can automatically make the rubber material be mixed over and over again, so the labor intensity and mixing time can be reduced greatly.
5. The roll nip of the mixing mill can be adjusted by using manual or electrical mode
6. To ensure the safety of staff and equipment, we install convenient button for emergency.
7. All the mixing mills we provide to you are checked through 8 hours non-stop full load operation, customers can use them immediately after installation.
Open mixing mill
The mill is mainly for rubber warming,plasticating,mixing and sheeting.
Specification:160-810
Product Description
Rubber Open Type Mill
Product Description:
junlin Rubber Mill Machine is used
| mode |
xk-160 |
xk-230 |
xk-250 |
xk-360 |
xk-400 |
| ltem |
|
|
|
|
|
| working diameter of rollers(mm)working diameter of rollers(mm) |
160 |
230 |
250 |
360 |
400 |
| working length of rollers(mm) |
320 |
600 |
620 |
900 |
1000 |
| linear speed of front rollers(m/min) |
8.03 |
10.94 |
14.1 |
16.25 |
18.65 |
| speed ratio of front and rear roller |
1:1.35 |
1:1.19 |
1:1.17 |
1:1.25 |
1:1.27 |
| capacity per.batch (kg) |
1-2 |
6-10 |
10-15 |
20-25 |
18-35 |
| motor power (kw) |
7.5 |
15 |
18.5 |
30 |
37 |
| overall size l*w*h(mm) |
1380*860*1320 |
2800*1200*1120 |
3800*1500*1500 |
3850*1650*1750 |
4250*1850*1870 |
| weight(kg) |
1000 |
2300 |
3000 |
6500 |
7000 |
| notes |
nylon bush use grease for lubricating,copper bush and bearing use grease or oil |
|
|
|
|
for mixing and kneading raw rubber, synthetic rubber, thermoplastics or E.V.A. with chemicals into even materials. The even materials can be fed to calender, hot presses or other processingmachiner3t for making rubber or plastic products. It adopts dual output reducer, the front and behind roller can be driven separately with rolling bearing structure, the roller can adopts hollow center groove roller or drilling hole smooth roller against difference using scope as mixing, refining or press pieces etc.
This machine can be installed stock blender according to customer s request to decrease the labor strength, also equipped with safe device.
Problems of customer concern:
About machine performance quality
1.Q:How old is Junlin factory?
A:The company has a history of 15 years since its inception in 2009
2.Q:What is the delivery time?
A:The delivery time of the machine is 15-60 days
3.Q:Which countries can I send to?
A:It can be delivered anywhere in the world
4.Q:How about the quality of the product?
A:The machine is guaranteed for up to one year. During the problem company to send accessories
Company strength
){kind=link}