| mode |
xk-610 |
| ltem |
|
| working diameter of rollers(mm) |
610 |
| working length of rollers(mm) |
2000 |
| linear speed of front rollers(m/min) |
30 |
| speed ratio of front and rear roller |
1:1.29 |
| capacity per.batch (kg) |
90-120 |
| motor power (kw) |
160 |
| overall size l*w*h(mm) |
7500*2500*2640 |
| weight(kg) |
28000 |
| notes |
nylon bush use grease for lubricating,copper bush and bearing use grease or oil |
junlin Product Parameters
1. Roller is made by special technology. There are normal roller and alloy roller for the customer to choose.
2. All of these adopt hardened gear reducer made of 35CrMo to reduce the speed. It has the advantages of low noisy, large transmission power, wear-resistant and impact resistance.
3. Adopt quenching gear to drive and increase the life of the whole machine.
4. Adopt foreign technology to weld the steel pedestal which is non-deformation, non-fracture. It can avoid the expense caused by wrong operation.
Product Description
Rubber mixing mill is used for mixing and kneading raw rubber, synthetic rubber, thermoplastics or E.V.A.with chemicals into final materials. The final materials can be fed to calender, hot presses or other processing machine for making rubber or plastic products.
Main Features
1. The roller is made of alloy chilled cast iron .Their surfance are hard and wear resistance . Its hardness of surface is HRC68-75
2. The end of rollers are supported by the roller ball bearing bush .It has the advantages of running smoothy ,energy saving , low noise and long life
3. The roll gap adjustment is manual control type . It is simple for operation
4. The machine is equipped with overloading protection device , in order to protect the main parts from being damanged
5. The machine adopts the single drive type transmission structure . It adopts the nylon pin coupling to prevent main parts from being damanged due to the overload of transmission part
6. The base is integral type , the transmission mode is of closed transmission . so it is safe and easy for use
7. The machine is installed with the emergency button and pulling rope as the safety device
8. This machine are installed with four sets lubrication device and suitable for grease lubrication
9. The machine adopts the PLC control cabinet , the machine will be suitable for your local industrial voltage and frequency
Open mixing mill
The mill is mainly for rubber warming,plasticating,mixing and sheeting.
Specification:160-810
Product Description
Rubber Open Type Mill
Product Description:
junlin Rubber Mill Machine is used
| mode |
xk-160 |
xk-230 |
xk-250 |
xk-360 |
xk-400 |
| ltem |
|
|
|
|
|
| working diameter of rollers(mm)working diameter of rollers(mm) |
160 |
230 |
250 |
360 |
400 |
| working length of rollers(mm) |
320 |
600 |
620 |
900 |
1000 |
| linear speed of front rollers(m/min) |
8.03 |
10.94 |
14.1 |
16.25 |
18.65 |
| speed ratio of front and rear roller |
1:1.35 |
1:1.19 |
1:1.17 |
1:1.25 |
1:1.27 |
| capacity per.batch (kg) |
1-2 |
6-10 |
10-15 |
20-25 |
18-35 |
| motor power (kw) |
7.5 |
15 |
18.5 |
30 |
37 |
| overall size l*w*h(mm) |
1380*860*1320 |
2800*1200*1120 |
3800*1500*1500 |
3850*1650*1750 |
4250*1850*1870 |
| weight(kg) |
1000 |
2300 |
3000 |
6500 |
7000 |
| notes |
nylon bush use grease for lubricating,copper bush and bearing use grease or oil |
|
|
|
|
for mixing and kneading raw rubber, synthetic rubber, thermoplastics or E.V.A. with chemicals into even materials. The even materials can be fed to calender, hot presses or other processingmachiner3t for making rubber or plastic products. It adopts dual output reducer, the front and behind roller can be driven separately with rolling bearing structure, the roller can adopts hollow center groove roller or drilling hole smooth roller against difference using scope as mixing, refining or press pieces etc.
This machine can be installed stock blender according to customer s request to decrease the labor strength, also equipped with safe device.
Problems of customer concern:
About machine performance quality
1.Q:How old is Junlin factory?
A:The company has a history of 15 years since its inception in 2009
2.Q:What is the delivery time?
A:The delivery time of the machine is 15-60 days
3.Q:Which countries can I send to?
A:It can be delivered anywhere in the world
4.Q:How about the quality of the product?
A:The machine is guaranteed for up to one year. During the problem company to send accessories
Company strength
){kind=link}